Search found 150 matches
- Sat Sep 26, 2009 11:42 am
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
I've always wanted a dark green Mk3 (probably as a 16v GTI). Sometime in the future when I can add to my collection
- Sat Sep 26, 2009 11:33 am
- Forum: Sensors/Switches
- Topic: Gear display / recognition switch F208
- Replies: 8
- Views: 20692
Re: Gear display switch F208
I'll check it with VAGCOM tomorrow :) sometimes it all three lights blink together, orange ecomatic light, gears light and the green light and engine turns off :( If all the 3 lights blink then a fault code should have been set - VAGCOM should be able to tell you what errors are occuring :) The eng...
- Fri Sep 25, 2009 3:56 pm
- Forum: Sensors/Switches
- Topic: Brake light switch F
- Replies: 3
- Views: 17816
Re: Brake light switch F
Hi Hajo, I've never seen any evidence of it doing this, is it used primarily when ecomatic mode is off? In what gears? I have tried to see what it does in 1st... but never saw any difference whether the brake pedal is pressed or not. Since the clutch is opened anyway as soon as the accelerator is re...
- Thu Sep 24, 2009 3:57 pm
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
Oooh, a blue ecomatic, i've never seen any in the UK other than red.
Welcome
Welcome
- Thu Sep 24, 2009 3:53 pm
- Forum: Sensors/Switches
- Topic: Gear display / recognition switch F208
- Replies: 8
- Views: 20692
Re: Gear display switch F208
You can buy this part from your VW dealers, the part number is : 020919823
It is the gear recognition switch mounted on the gearbox housing. This may not neccesarily be the problem, so I would inspect the switch first.
You can also test it using VAGCOM
It is the gear recognition switch mounted on the gearbox housing. This may not neccesarily be the problem, so I would inspect the switch first.
You can also test it using VAGCOM
- Fri Sep 11, 2009 7:27 pm
- Forum: Chat
- Topic: 2.problem “the starter motor stops turning”
- Replies: 8
- Views: 9694
Re: 2.problem “the starter motor stops turning”
Hi Hajo, I didn't want to post till now in order to tempt-fate but when I replaced the auxillary battery it fixed this. I think the problem was the road speed sender (RSS) was loosing signal and confusing the ECU. I do have some other slightly odd behaviour with the starter motor, but I am more conc...
- Thu Sep 10, 2009 8:16 pm
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
That poor Mk3 golf
They are built well aren't they
They are built well aren't they
- Sun Sep 06, 2009 7:44 pm
- Forum: Chat
- Topic: Digiswing - Display Group 06
- Replies: 2
- Views: 4547
Re: Digiswing - Display Group 06
My ecomatic is much better after basic setting -04-. The clutch takes up drive sooner
- Fri Sep 04, 2009 11:15 pm
- Forum: Chat
- Topic: Digiswing - Display Group 06
- Replies: 2
- Views: 4547
Digiswing - Display Group 06
"Not relevant for workshops"
But it is relevant for me!
I notice that one of the values is the production date of the digiswing unit.
Any ideas what the other 3 values are for?
But it is relevant for me!
I notice that one of the values is the production date of the digiswing unit.
Any ideas what the other 3 values are for?
- Fri Sep 04, 2009 11:12 pm
- Forum: Chat
- Topic: 3. Problem „radio switches off“
- Replies: 1
- Views: 2943
Re: 3. Problem „radio switches off“
I fixed this problem today - woo ! :) I replaced the auxillary battery on the car. Even when my ecomatic was brand new, the radio kept cutting out, they must have put a faulty battery in at the factory. Also, the VW dealers told the previous owner, that this was a known fault with the car (they were...
- Fri Sep 04, 2009 11:10 pm
- Forum: Chat
- Topic: 2.problem “the starter motor stops turning”
- Replies: 8
- Views: 9694
Re: 2.problem “the starter motor stops turning”
Hi Hajo, I will follow out your procedure as soon as I can. I need to get a charger for my laptop in the car, otherwise the battery on my laptop runs out really quickly. My laptop batter only lasts 10 min :mrgreen: Can I ask - what happened when your starter motors were failing - Did the starer just...
- Fri Sep 04, 2009 11:08 pm
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
Hi Hajo,Hajo06 wrote:I would like to show other photos of Golf MK3. But it does not go. What do I make wrong?
Hajo
Upload them to http://www.tinypic.com
Then use the IMG tags to put them on
- Wed Sep 02, 2009 9:06 pm
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
This is a picture of my Automatic Golf
- Wed Sep 02, 2009 8:56 pm
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
Hi Hajo, We call them "Golf Mk3" here :) - It stands for "Mark", as in "version". I already have VAGCOM and checked all the measuring blocks and fault codes Everything is OK. :) (but that does not help me find the problem :() F191 works correctly as expected. Load signa...
- Wed Sep 02, 2009 10:55 am
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
Hallo Hajo, Lassen Sie uns versuchen, in Deutsch :-) Mk3 Golf natürlich ;) Ich werde bald ein paar Bilder zu erhalten. Ich habe die "Ecomatic - Self Diagnose" Werkstatt-Handbuch und auch das "Selbst Studiengang" mit allen Diagrammen. Ich werde erklären, besser für dich :) Wenn de...
- Wed Sep 02, 2009 10:43 am
- Forum: Sensors/Switches
- Topic: Gear display / recognition switch F208
- Replies: 8
- Views: 20692
Re: Gear display switch F208
I guess I should have figured that.
The gear recognition switch is F209 (also called gear monitor switch) link, this is the one which reports if you haven't pushed the gearstick in properly so digiswing knows whether it can close the clutch or not
The gear recognition switch is F209 (also called gear monitor switch) link, this is the one which reports if you haven't pushed the gearstick in properly so digiswing knows whether it can close the clutch or not
- Tue Sep 01, 2009 8:16 pm
- Forum: Sensors/Switches
- Topic: Gear display / recognition switch F208
- Replies: 8
- Views: 20692
Re: Gear display switch F208
When I first bought my car, I looked in the engine, and the Gear reconigiton switch was unplugged
What will we do when VW stop making the parts ?
What will we do when VW stop making the parts ?
- Tue Sep 01, 2009 8:10 pm
- Forum: Chat
- Topic: Small talk with Hajo
- Replies: 32
- Views: 89551
Re: Small talk with Hajo
Hi Hajo, Good to hear from you again, your English is good :) I have only owned my Ecomatic for only 3 months, I have two Mk3s :) The previous owners of my car, the owner had driven it for 14 years since new! I bet they were really used to how the car behaved after all that time. I am still getting ...
- Tue Jun 23, 2009 9:38 pm
- Forum: Electrical System
- Topic: 90 ampere alternator
- Replies: 0
- Views: 17956
90 ampere alternator
Larger alternator than standard 1Y engine vehicle. Volkswagen felt it was neccessary that the ecomatic was fitted with a larger alternator due to the higher power consumption (for starter motor), and reduced charging time (engine off phase).
- Tue Jun 23, 2009 9:37 pm
- Forum: Electrical System
- Topic: 92Ah/95Ah battery
- Replies: 6
- Views: 22053
92Ah/95Ah battery
Larger battery than standard vehicle, largest battery out of the whole Mk3 range. Original part number: 000 915 105 AH (95Ah 450A) (dropped) Replacement part number: 000 915 105 DK Varta sell OEM equivilants (Varta Silver and Ultra/Stop-Start recommended). The genuine battery is made by Varta anyway...
- Tue Jun 23, 2009 8:35 pm
- Forum: Electrical System
- Topic: 9Ah auxillary battery
- Replies: 3
- Views: 13630
9Ah auxillary battery
The 9Ah auxillary battery is used to provide power to neccesary electrical consumers when the engine is being started, to avoid power interruptions. Original battery made by Hoppecke If your radio and instrument cluster loses power when the engine is restarting - the first thing to do is replace thi...
- Tue Jun 23, 2009 8:34 pm
- Forum: Electrical System
- Topic: Control unit for second battery and lights J328
- Replies: 0
- Views: 17803
Control unit for second battery and lights J328
The control unit for second battery and lights is required to switch the power from the main battery to the auxiliary battery during an engine starting procedure, this is so power to the lights and other neccesary electrical consumers (such as the instrument cluster) is not interrupted during the en...
- Tue Jun 23, 2009 8:32 pm
- Forum: Electrical System
- Topic: Coolant pump V50
- Replies: 3
- Views: 31592
Coolant pump V50
The coolant pump V50 is electrically powered and is operated when the ignition is switched on, its function is to continue circulating water around the engine/heater matrix when the engine is switched off, so that the heater output does not drop-off. Not only this, it ensures that there is no locali...
- Tue Jun 23, 2009 8:31 pm
- Forum: Electrical System
- Topic: Power steering pump V119
- Replies: 2
- Views: 18924
Power steering pump V119
Electronic power steering pump, replaces engine driven power steering pump used on non-ecomatic vehicles. Pump is activated if ignition is on and vehicle is moving (for example freewheeling), and is always on when engine is running, including when stopped. http://www.deylan.co.uk/golf/ecomatic/image...
- Tue Jun 23, 2009 8:30 pm
- Forum: Electrical System
- Topic: Power steering relay J320
- Replies: 0
- Views: 17885
Power steering relay J320
Relay required to operate Power Steering Pump V119
- Tue Jun 23, 2009 8:29 pm
- Forum: Vacuum/Clutch System
- Topic: Mechanical vacuum pump
- Replies: 0
- Views: 18673
Mechanical vacuum pump
The mechanical vacuum pump creates vacuum from the drive of the engine. This provides vacuum for the brake system, and clutch system depending on operational state.
- Tue Jun 23, 2009 8:28 pm
- Forum: Vacuum/Clutch System
- Topic: Vacuum reservoir
- Replies: 0
- Views: 18798
Vacuum reservoir
The vacuum reservoir is located in the front left wheel housing underneath the battery, and has seperate compartments to store the clutch and brake vacuum -- the vacuum system sharing is done through the priority switching valve.
- Tue Jun 23, 2009 8:27 pm
- Forum: Vacuum/Clutch System
- Topic: Vacuum pump relay J318
- Replies: 0
- Views: 18695
Vacuum pump relay J318
This is the relay to operate the vacuum pump V22
- Tue Jun 23, 2009 8:26 pm
- Forum: Vacuum/Clutch System
- Topic: Electric vacuum pump V22
- Replies: 0
- Views: 18925
Electric vacuum pump V22
The vacuum pump V22 provides vacuum for the clutch system ONLY, and is operated whenever there is insufficient vacuum in the clutch system (recognized by the opening of the clutch system pressure switch F210). If this pump is recognized as failed, the priority switching valve is opened and the vacuu...
- Tue Jun 23, 2009 8:24 pm
- Forum: Vacuum/Clutch System
- Topic: Clutch positioner bleeder/discharge/vent valve N184
- Replies: 0
- Views: 19140
Clutch positioner bleeder/discharge/vent valve N184
This valve is located within the clutch control element, and opens or closes to remove vacuum (i.e., let air in) to the cluch final control element (close the clutch).
This is possibly a PWM solenoid.
This is possibly a PWM solenoid.
- Tue Jun 23, 2009 8:23 pm
- Forum: Vacuum/Clutch System
- Topic: Clutch positioner vacuum valve N183
- Replies: 0
- Views: 19275
Clutch positioner vacuum valve N183
This valve is located within the clutch final control element, and opens or closes the vacuum supply to the clutch element (i.e., pulls clutch open via suction).
- Tue Jun 23, 2009 8:21 pm
- Forum: Vacuum/Clutch System
- Topic: Priority shift/switch valve N185
- Replies: 1
- Views: 13003
Priority shift/switch valve N185
The priority shift valve connects the brake and clutch vacuum circuits. When the engine is running, providing the brake servo is sufficient, the valve opens and the two vacuum circuits are shared, the electric pump is no longer required as the engine-driven vacuum pump exhaustes (provides vacuum to)...
- Tue Jun 23, 2009 8:16 pm
- Forum: Vacuum/Clutch System
- Topic: Brake booster vacuum switch F190
- Replies: 0
- Views: 25117
Brake booster vacuum switch F190
The brake booster vacuum switch (F190) informs the DIGISWING control unit whether the pressure in the brake system is satisfactory. Type: open/closed Colour: Red Switch closed: below 0.7 bar (vacuum pressure too low). Measuring block status: "1" Switch open: above 0.7 bar (vacuum pressure ...
- Tue Jun 23, 2009 8:14 pm
- Forum: Vacuum/Clutch System
- Topic: Pressure switch for clutch system F210
- Replies: 0
- Views: 24693
Pressure switch for clutch system F210
The clutch system pressure switch (F210) informs the DIGISWING control unit whether the clutch system pressure is satisfactory. Type: open/closed Colour: Green Switch opened: below 0.55 bar (vacuum pressure too low) Switch closed: above 0.55 bar (vacuum pressure OK) If the switch is opened, the cont...
- Tue Jun 23, 2009 8:12 pm
- Forum: Vacuum/Clutch System
- Topic: Clutch positioner clutch travel distance sender G162
- Replies: 0
- Views: 24198
Clutch positioner clutch travel distance sender G162
This is a potentiometer located inside the top of the clutch final control element, it has a very thin (what can only be described as) "piece of string" on it attached to the diaphragm of the lower part of the element. It informs the DIGISWING control unit the position of the clutch in vol...
- Tue Jun 23, 2009 7:38 pm
- Forum: Sensors/Switches
- Topic: Ecomatic switch E163
- Replies: 0
- Views: 11619
Ecomatic switch E163
The Ecomatic switch is installed onto the window wash/wipe stalk and when pressed is used to turn the Ecomatic operation on or off. This switch is spring loaded and sends a 12v signal to the DIGISWING controller, and the controller changes state from what is current selected. Therefore, everytime th...
- Tue Jun 23, 2009 7:37 pm
- Forum: Sensors/Switches
- Topic: Load signal potentiometer G157
- Replies: 0
- Views: 11833
Load signal potentiometer G157
The load signal potentiometer is in essence a Throttle Position Sensor (TPS), it effectively informs the DIGISWING control unit the position of the accelerator pedal, and thus, the DIGISWING control unit uses this information to master the clutch operation, and also determine when to switch the engi...
- Tue Jun 23, 2009 7:35 pm
- Forum: Sensors/Switches
- Topic: Gearbox speed sender G38
- Replies: 0
- Views: 11536
Gearbox speed sender G38
This sensor measures the speed of the gearbox input shaft and it's primary purpose is to calculate the clutch slip, to enable smooth clutch operation, and also learn clutch wear values by comparing against engine speed.
- Tue Jun 23, 2009 7:34 pm
- Forum: Sensors/Switches
- Topic: Engine speed sender G28
- Replies: 0
- Views: 11423
Engine speed sender G28
The engine speed sender monitors the engine speed and reports the value to the DIGISWING control unit. It is required so the DIGISWING controller can start the engine correctly (i.e., disengage the starter motor once the engine has fired), as well as being used to master the clutch (i.e., to determi...
- Tue Jun 23, 2009 7:32 pm
- Forum: Sensors/Switches
- Topic: Road speed sender G22
- Replies: 0
- Views: 11503
Road speed sender G22
The road speed sender is used to report to the DIGISWING controller how fast the vehicle is moving. It's primary function is to report when the vehicle is stopped (i.e., turn power steering pump on/off). It is also used to control the gearshift display control lamp (to warn of inappropriate gear sel...
- Tue Jun 23, 2009 7:31 pm
- Forum: Sensors/Switches
- Topic: Gear display / recognition switch F208
- Replies: 8
- Views: 20692
Gear display / recognition switch F208
The gear display switch (also known as the gear recognition switch) reports to the DIGISWING controller what gear is currently engaged, or the neutral gate it is in. Specifications: R, 1, 2, 3, 4, 5, NG* 1-2, NG 3-4 *Stands for neutral gate. This data is required to prevent an initial start of the c...
- Tue Jun 23, 2009 7:30 pm
- Forum: Sensors/Switches
- Topic: Gear monitor switch F209
- Replies: 0
- Views: 12174
Gear monitor switch F209
The gear monitor switch is a supplementary switch which detects whether a gear has been PROPERLY engaged, if a gear is only partially engaged this informs the DIGISWING controller about this state and the clutch is not closed until the gear is correctly engaged - the control unit then flashes the ge...
- Tue Jun 23, 2009 7:27 pm
- Forum: Sensors/Switches
- Topic: Coolant temperature sender G62
- Replies: 0
- Views: 11486
Coolant temperature sender G62
This temperature sender reports to the DIGISWING control unit the temperature of the engine coolant, this is required to stop the engine switching off when the coolant temperature is below 40C, there is a timing element to this decision (for example, as soon as the temperature reaches 40C, there is ...
- Tue Jun 23, 2009 7:26 pm
- Forum: Sensors/Switches
- Topic: Gear operating switch F191
- Replies: 0
- Views: 11404
Gear operating switch F191
The gear operating switch is installed in the gearshift knob and detects vertical movement along the gearstick. When ecomatic mode is switched off, because the clutch is not opened when the accelerator pedal is lifted, this switch is relied upon to tell the DIGISWING control unit to open the clutch ...
- Tue Jun 23, 2009 6:14 pm
- Forum: Sensors/Switches
- Topic: Door contact switch F2
- Replies: 0
- Views: 11684
Door contact switch F2
The door opening switch on the drivers door is installed to serve three purposes 1) When the drivers door is opened, the DIGISWING control unit briefly actuates the clutch positioner, it then checks the state of the clutch circuit pressure using the Pressure switch for clutch system F210 , and if th...
- Tue Jun 23, 2009 6:12 pm
- Forum: Sensors/Switches
- Topic: Brake light switch F
- Replies: 3
- Views: 17816
Brake light switch F
The brake light switch sends information to the DIGISWING control unit about whether the brake pedal is pressed. As far as I know this switch is used to tell the control unit to open the clutch earlier when the brake pedal is depressed in engine braking mode (Ecomatic off). I suspect it has no relev...
- Tue Jun 23, 2009 6:11 pm
- Forum: Sensors/Switches
- Topic: Diesel engine stop switch F207
- Replies: 0
- Views: 11886
Diesel engine stop switch F207
The diesel engine stop switch is located near the coolant reservoir, this switch informs Digiswing when the bonnet is lifted. If the vehicle is in gear, the vehicle is shut off after 4 seconds and the clutch is opened immediately. In addition, if ecomatic mode is on and the engine has switched off d...
- Tue Jun 23, 2009 4:53 pm
- Forum: Sensors/Switches
- Topic: Ecomatic electrical components overview
- Replies: 0
- Views: 11763
Ecomatic electrical components overview
Engine operation sensors: Diesel engine stop switch F207 Brake light switch F Door contact switch F2 Gear operating switch F191 Coolant temperature sender G62 Gear monitor switch F209 Gear display switch F208 Road speed sender G22 Engine speed sender G28 Gearbox speed sender G38 Load signal potenti...
- Tue Jun 23, 2009 4:35 pm
- Forum: Engine/Ecomatic operation
- Topic: Digiswing/Ecomatic Control Unit J327
- Replies: 2
- Views: 24496
Digiswing/Ecomatic Control Unit J327
Digiswing/Ecomatic Control Unit J327 Digiswing is the Ecomatic Control Unit and is an Engine and Clutch Management System . Technically it is a Powertrain Control Module (PCM) which controls the clutch operation and engine switch-off and start-up routine based on operating status and sensor input. I...
- Tue Jun 23, 2009 4:35 pm
- Forum: Vacuum/Clutch System
- Topic: Vacuum System Components
- Replies: 0
- Views: 11811
Vacuum System Components
Vacuum pump V22 Vacuump pump relay J318 Vacuum reservoir (in wheel arch, battery side) Pressure switch for clutch system F210 Brake booster vacuum switch F190 Mechanical vacuum pump Priority switching (shift) valve N185 Clutch control element vacuum valve N183* Clutch control element discharge valv...